LENR news Communicate on Low Energy Nuclear Reactions


Ecat independent test is out


http://ecat.com/files/Indication-of-ano ... device.pdf


The two test measurements described in this text were conducted with the same methodology on two different devices: a first prototype, termed E-Cat HT, and a second one, resulting from technological improvements on the first, termed E-Cat HT2. Both have indicated heat production from an unknown reaction primed by heat from resistor coils. The results obtained indicate that energy was produced in decidedly higher quantities than what may be gained from any conventional source. In the March test, about 62 net kWh were produced, with a consumption of about 33 kWh, a power density of about 5.3 · 105, and a density of thermal energy of about 6.1 · 107 Wh/kg. In the December test, about 160 net kWh were produced, with a consumption of 35 kWh, a power density of about 7 · 103 W/kg and a thermal energy density of about 6.8 · 105 Wh/kg. The difference in results between the two tests may be seen in the overestimation of the weight of the charge in the first test (which was comprehensive of the weight of the two metal caps sealing the cylinder), and in the manufacturer’s choice of keeping temperatures under control in the second experiment to enhance the stability of the operating cycle. In any event, the results obtained place both devices several orders of magnitude outside the bounds of the Ragone plot region for chemical sources.

Even from the standpoint of a “blind” evaluation of volumetric energy density, if we consider the whole volume of the reactor core and the most conservative figures on energy production, we still get a value of (7.93 ± 0.8) 102 MJ/Liter that is one order of magnitude higher than any conventional source.

Lastly, it must be remarked that both tests were terminated by a deliberate shutdown of the reactor, not by fuel exhaustion; thus, the energy densities that were measured should be considered as lower limits of real values.

http://ecat.com/news/3rd-party-report-s ... ssi-effect


Discuss www.lenr-forum.com



LENR-Cities to propose it’s project to Neuchatel (Switzerland)

On the website of LENR-Cities (LENR-cities.com), on the french version,  a short notice explain in French that they are currently submitting this project to the city and district (canton) of Neuchâtel in Switzerland.

Développer l'Industrie LENR 
Une énergie abondante, propre et économique ! 
Projet Suisse Nous le soumettons actuellement aux acteurs de la ville et du canton de Neuchâtel; 
Site projet Suisse en construction.

They start a swiss version of their site : http://lenr-cities.ch/

One page give, in french a clear explanation of their project :

Summary : LENR-Cities is a LENR Business factory, and activity intended to structure and develop cooperative activities with industrial purposes, focussed on applications of LENR technologies

Taking the form of a territorial (Cities) initiative (LENR), the ambition is to develop a "technology and industry growth pole" with actors of Neuchâtel district (canton). the design and production of high-tech devices, but necessarily of low final production cost, will demand excellence along all the value chain, from industrialization of the technology to the mass production, autonomous or designed to be integrated into products (consuming energy).

Toward an open energy source, clean and universal.

Join the ecosystem.

This announce is not about an agreement, but just about project proposed to local authorities

You have to notice that Swiss political system is mostly focussed at the local level, the "canton", and much less at the federal level. This explain why this local approach is simply adapted to swiss structure.

Neuchâtel is since long cited in LENR-Cities ecosystem as LENR-Cities headquarter, the "High tech heart of Switzerland", especially for micro and nano-technologies.




You can connect that modest annonce, with the one about LENR-Invest joining that ecosystem.

What mean that announce and other moves, is that, beside the Edisonian companies who are trying to develop the firsts LENR-reactors,  there are people who prepare to develop the second stage of the revolution, the revolution of application, the revolution of well-funded research, the revolution of an LENR industrial.

LENR-Cities try to address the question of transition, to accelerate innovation, and reduce the risk for innovators to be toasted by the war to come. Their management model seems based on modern corpus of innovation management knowledge (the business factory,...), and LENR-Cities founder are recidivist (some prefer to say experienced) in innovation.

Let us hope that it will success, and attract interest from various actors, who want to participate to the LENR revolution, either as application builder, as investors, as technology providers... that it will mitigate the risk of participating the revolution, through cooperation, resource and risk sharing, without individual actors losing property of their creations. Maybe it can even create dynamic markets of product, technologies, funding, avoiding LENR revolution to be slowly captured by big actors who control all the chain of value.

Wish them good vibrations...


lenr practical research 1

Publicerad den 13 maj 2013

Hi all

This is the continuation of my testing on LENR

Basic infos
there is 600 ml of tap water mixed with 2.5 grams of NaHCO3 (0.05 mole )
The cathode is Tungstene /lanthane 2.4 mm diameter and 1.5 cm length.
The anode is inox 3 mm diameter screw rod
Temperature of reaction start is 93 degrees

This time i will approach a mean to use the output gaz of the reactor.

So as you can see i have inserted the Security- buller inside the reactor in order to warm the water , so the vapor will not condensate in the buller, and get out almost unchanged.

In my previous test, i simply made some comparisons of heating between the reactor and the thermoplongeur.

This time i will try to get the best ratio of HHo ( which is anyway weak on this set up), and the vapor when i go above the boiling point.

So the idea is to get a "special mixed gaz " which i intend to inject directly in the carburator of a motor, and ignite it with a plasma sparkplug.

Next step is to thermically insulate the reactor , so the input power will be lower ??

Youp a nice challenge

Hope this will work, and if not i will try something else!!

good luck at all



LENR Institute


Publicerad den 14 maj2013

Wanting to establish a publically funded LENR Institute








The power of internet.

Positive thinking helps us move forward.

Sterling Allan makes a great volunteer work!
He reports frequently and puts his life to spread the message about and crazy/smart ideas.

We already know that he is an incurable optimist, but that's exactly the atetyden we need to have. Please see his show as entertainment, instead of facts. In the free energy field, there will always be dreamers.

One day it will happen.




New leap in ecosystem development with LENR-Cities and LENR-invest !

Hi, I relay on lenr-news that business news around LENR-Cities team, that I just published on the forum :

It is probably there the best place to discuss about that important event:


"LENR-invest", an investment company in LENR and new energies, is joining the ecosystem recently announced by LENR-Cities. After announcement of the partnership with Kresenn and Celani, It may be a significant jump, a new vehicle to drive investors, big and small, at last to invest on LENR revolution, on the big race and not on individual horse. Future will say, but sure these LENR teams bet on it.

Here is the short announce on their web-site LENR-Invest.com :


LENR-Invest and LENR-Cities tune their energies on LENR market.

Their teams are pleased to announce that they are partnering in order to grow the reach of their ecosystem by offering new capabilities to companies developing LENR applications.

Our joint offer addresses needs in funding and technology enablement by leveraging all capabilities of our ecosystem and partners.
For more details, please send an email to contact@lenr-invest.com or contact@lenr-cities.com.

The question now is how the industry and finance will react to that approach?

LENR-Cities does not propose a product or a technology, but follows an approach to develop new businesses that might based on what they experiment in a previous project. Their objective is clearly to accelerate the LENR transition.

I feel that it may raise much interest for various actors, because there is a need around sharing risk, sharing resources, role specialization, one-stop-shop, and allowing fair relationships between those new market actors.

There is no doubt that LENR will allow huge success, not only with LENR reactors, but even more with various LENR applications, however this new frontier of business will be bloody like any gold-rush. Maybe being member of a team of businesses will reassure the enthusiast yet careful actors. Probably more .

Note also that while most mainstream source still joke at LENR, while LENR fans still questions facts, those guys works to prepare, not a reactor, but an industry.

See also that article thay may explain why LENR developpement may need some "ecosystem fertilization" :